How to Clean Main Brush [L8000 Plus&L8000 Pro]

1. Press the release switch on the brush.

2. Take off main brush guard to open it.

3. Open the two caps on the sides ofthe main brush, remove and clean any hair or dirt present on both sides. Reinstall the two caps on the main brush.

4. Use the blade on the provided Cleaning Brush to cut any hair or string wrapped around the main brush. Then, use the brush to remove dirt from the main brush.

5. Install the Main Brush into the robot, ensuring to pay attention to the direction. Insert the fixed protruding end first, then click it into place.

6. Press down to securely instal the brush guard into place.

Model: L8000 Plus / L8000 Pro

— THE END —

Disclaimer: This article expresses the will of the release at the time, and if there is any misunderstanding, the final interpretation right belongs to Tikom.

← ≡ ≡ →